Motherboard which screws

And, sometimes, we will need more screws, in the case of wanting to install new components inside our box. In this guide we are going to see the different types of motherboard screws and mounting hardware that a computer needs to a greater or lesser extent, and of course you may not need all of them in any case.

This screw is the one used to hold the fans to the case of our computer. Its head is flat, with a conical shape to enter the flare and is usually of the Philips No. The diameter of the thread is 5.

As a rule, computer case manufacturers usually include up to 4 of these screws. Although they are usually supplied with the fans when we buy them. This is the most common large screw on our PC. It is usually used to hold the expansion cards that we put to the motherboard, as well as the power supply and even the side panels of the case. The standard stem length for it is usually 6. Thumbscrews are a type of screw that has a fairly large head, which has been knurled.

This allows them to be loosened and tightened using only the fingers of the hand although they generally also have grips to use screwdrivers. Thumbscrews typically have a shank about 7.

This type of screw has a thread pitch of 0. They are often used to hold optical drives. Its external appearance is very similar to that of the previous screws, which usually leads to many mistakes during assembly.

The most important difference between these 2 screws is the thread pitch: M3 hex heads have a finer thread compared with the screws. This is the screw that is typically used to secure the motherboard to the brass standoffs. It is also used to attach 2. It is identical to the previous model, only the stem is only 4mm in length. It is often used to attach optical drives to the case. This is the brass standoff used to mount the motherboard on the mounting tray inside the case or on a test bench.

This type of separator has a male and a female thread inside , with a pitch of 0. The length of the shank is 3mm, while that of the internal bore is also 3mm. The thread pitch of the internal hole is still maintained at 5 mm. If you are thinking of buying a new PC by parts and assembling it yourself, you should know that one of the most delicate elements when it comes to installation is the motherboard.

You need to be cautious when mounting the motherboard to do it properly and without damaging anything in the process.

Of course, it is understood that you already have the motherboard and the computer case ready for installation, as well as the necessary motherboard screws which is always included with any case. Installing the motherboard may seem like a breeze, like putting it on, screwing it and ready, but it has its technique.

Which screws should be installed is usually described specifically in the motherboard manual at the beginning in the installation section. I generally the install screws in all the standoff holes for two reasons, because each screw at each standoff provides:. A2A: But, why?

It is Bluetooth, so it is meant to communicate via Bluetooth, wirelessly. If you want to glue a wireless device to your motherboard, you can do that. Now, maybe you are talking about a Bluetooth transceiver. Maybe you are asking whether motherboard manufacturers could include a Bluetooth transceiver into a motherboard.

Of course, this is not something you would do after-market, because motherboards are not designed to be modified, themselves. The answer really depends on the particular PC computer case. Computer cases need to conform to a specific standard, e. And there are also different types of computer cases. Generally, most reputable computer case makers will provide both the standoffs and mounting screws for the motherboard.

Having the right screw is important since there are different screw thread pitches for different makes of standoffs, the latter with their own dimensions for the particular case. Motherboards and other circuit boards often use a UNC standoff. Then with a screwdriver, unscrew the motherboard screw. The screw should be separated from the standoff. Most cases give you access to the underside of the motherboard by removing the opposite side of the case. Motherboards do not usually come with Mounting screws.

Nov 9, 0 4, 1. You must log in or register to reply here. How do I know what screws to use to secure the mobo? Motherboards 1 Aug 18, K Question what size m. Motherboards 2 Feb 15, Question what size m. Post thread. Question Super giving me worse frames than a ? Started by Small-Change Oct 7, Replies: Graphics Cards. News Comments. Question Ah! My parents won't buy me a single graphic card like GTX and I worked so hard in my exams I'm waiting since 2 years help me pls!

Question Front Panel Pins wont respond most of the time. Started by jakepronger Today at AM Replies: 0. Latest posts. Question My Ti 4GB had some smoke coming from it. Can it be repaired? Latest: Master Djoza A moment ago. Question Some questions about Win10 merged.

Latest: Firewall. Windows Moderators online. Tom's Hardware is part of Future plc, an international media group and leading digital publisher.